On Site Safety T-Plugs Uncorded Earplugs

Description

On Site Safety T-Plugs Uncorded Earplugs

Code: dBT27J50

The rocket shaped On Site Safety T-Plugs Uncorded Earplugs are characterised by very high sound absorption levels, making it suitable for use in very loud environments.  The T-Plugs earplugs have a sealed surface, preventing foreign bodies from penetrating the plug.  The soft closed cell foam offers real comfort, even when worn for extended periods, and helps to prevent dirt build up.  The earplugs are pre-shaped and provide very strong insulation to sound.

SCL80: 27 dB – Class 5 protection

Certified to Australian Standard AS/NZS 1270:2002

Also available: Bastion DispensaPlug™ Ear Plugs, Maxisafe 3004 Red Earmuffs, PRapid Banded Earplugs

 

For more product information, click here

For more Hearing Protection products, click here

Applications

• Agriculture and Forestry
• Chemical
• Construction
• Fire Protection
• Manufacturing
• Medical
• Military
• Mining
• Municipal
• Services
• Oil and Gases
• Steel and Metals
• Transportation
• Welding

Fitting Instructions:

1. With clean hands, roll (don’t squeeze) the earplug between your thumb and first 2 fingers until the diameter for the plug is a small as possible.
2. Reach over your head with the opposite hand and pull the top of your ear to open the ear canal.
3. Whilst holding the ear open, quickly push the plug into your ear as deep as possible.  Keep your finger in the end of the plug for about 30 – 40 seconds until the plug expands to seal the ear.  Wait briefly for the earplug to fully expand before entering the noisy environment
4. After use, slowly and with a gentle rotation withdraw the earplugs from the ear canal to avoid damaging the eardrum

Warning:  Earplugs should be worn all times in noisy surrounding and be fitted prior to entering the noisy area.  If instructions are not followed the function and protection may be severely impaired.  Earplugs must be fitted, adjusted and maintained in accordance with the manufacturers instructions.  These earplugs, when fitted with a connecting cord, should not be used where there is a risk that the cord could be caught up during use.

 

Attenuation data in accordance with AS/NZS 1270:2002

Frequency (Hz)	125	250	500	1000	2000	4000	8000
Mean (db)	29.3	31	31.9	30.6	31.1	40.4	48.0
Standard Dev. (dB)	6.9	6.7	8.3	6.9	4.0	3.8	6.1
Mean minus Standard Dev. (dB)	22.4	24.3	23.6	23.7	27.1	36.6	41.9

The reported attenuation will be obtained only if the earplugs are in good condition and worn as recommended.  Refer to AS/NZS1269.3 for guidance.

The T-Plugs mimic the Howard Leight Laser Lite earplugs, but offer greater sound insulation and hearing protection.